Injury Illness Prevention Plan - Flipbook - Page 131
Health and Safety Program Manual
Teamwrkx
Construction, Inc.
Issue Date: 10/16/23
Revision Date: 10/16/23
Hot Work
Reference: A-9
This Guidance Document is offered and provided by Teamwrkx Construction, Inc. as guidance to assist its
subcontractor partners in complying with the minimum requirements of the Clients they are connected to
and/or facilities they are registered for, as well providing other helpful information to assist in the
development of successful safety programs that address potential exposure hazards for employees. The
information and material in this Guidance Document is offered for informational purposes only and
Teamwrkx Construction does not make any warranties or representations with respect to the content,
quality, accuracy or completeness of any information or material contained herein. TEAMWRKX
CONSTRUCTION EXPRESSLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, TITLE, OR INFRINGMENT OF THE INTELLECTUAL PROPERTY RIGHTS OF A THIRD PARTY, WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE, OR
OTHERWISE. Teamwrkx Construction assumes no legal liability for the content, quality, accuracy, or
completeness of the information or material contained in this template. In no event will Teamwrkx
Construction be liable for any damages, whether direct, indirect, general, consequential, incidental,
exemplary, or special, arising from the use of this template. This template has been made available for general
use only on an “as-is” basis. All access to, and use of, this template is at the member’s risk. It is the
responsibility of the member to ensure that the information contained in this template is suitable for the
purpose and applicable to the member. This includes but is not limited to ensuring that the program addresses
applicable legislation.
PURPOSE
The purpose of COMPANY NAME’s, hereafter referred to as “The Company”, policy is to establish cutting and
welding safety procedures and to ensure that all cutting, and welding operations are performed in the safest
manner possible, and in compliance with applicable regulations.
POLICY
All cutting and welding operations shall be performed in compliance with OSHA standards and all other
applicable state, local and client regulations, policies, procedures, and standard safe work practices. Welding is
restricted to areas or situations where adequate fire prevention, welder protection and passerby protection can
be assured.
PROCEDURES
This safety standard is intended as a guide to safe practices in welding, burning, brazing and related operations.
The precautions and protective measures outlined are recommended minimum requirements. Welders should
exercise judgment in applying these precautionary measures in such matters as length of work periods, poor
1
